6.Lifetime Free update
What difference between X100 PRO2 and X100 PRO3?1.X100 PRO3 support more special functions then pro2 .
Xtool Pro3 is a professional key programmer tool + obd2 diagnostic+special functions
X100PRO3 is a professional key matching machine with 7 special functions OBD2/EOBD diagnostic function. It is an upgraded version of X100PRO2, adds EPB, ABS, TPS reset functions, which can meet the needs of more The needs of multiple car owners
7 Kinds of Special Reset Service Functions
*Oil Reset Service: Performs reset for the Engine Oil Life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate, and turns off the warning light;
*Electronic Parking Brake (EPB) Service: Maintains the electronic braking system safely and effectively through deactivating and activating the brake control system, assisting with brake fluid control, opening and closing brake pads, and setting brakes after disc or pad replacement, etc.
*Steering Angle Sensor (SAS) Service: Performs calibration for the Steering Angle Sensor (SAS), which permanently stores the current steering wheel position as the straight-ahead position in the steering angle sensor EEPROM. On successful completion of the calibration, the steering angle sensor fault memory is automatically cleared.
*IMMO Service: enables you to disable the lost vehicle keys and program a replacement key fob.
*ABS Bleeding：ABS brake bleeding to get a firm brake pad after air exhaustion.
*Throttle Relearn: Need to perform throttle matching: 1. After replacing the electronic control unit, the electronic control unit has not stored the relevant characteristics of the throttle valve. 2. After the electronic control unit is powered off, the memory of the electronic control unit memory is lost. 3. After replacing the throttle assembly. 4. After replacing or disassembling the air inlet. 5. After cleaning the throttle.
And many more ...
XTOOL X100PRO3 is an extremely cost-effective key matching device. It connects to the car ECU through the OBD interface, performs key matching,
and generates a key. X100PRO3 supports EEPROM Adapter, including Read/Write/Backup IMMO Data with EEPROM adapter. NOTE: IMMO & Programming are NOT universally compatible
1.New keys programming
2.Reads keys from immobilizer's memory
4.New remote controller programming
5.New mechanical key number programming
6.Vehicle Identification Number programming
7.Reset ECM & reset immobilizer
X100 PRO3 support OBD2 function : Reading Codes, Erasing Codes & Reset, Data Stream, I/M Readiness Status, Read Live Data Stream, View Freeze Frame Data, O2 Sensor Test, On-Board Monitor Test, Read Vehicle Information, Component Test
Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
Read Live Data StreamRead Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer
On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability
Support OBD2 engine diagnostic functions including
The SAE J1850 PWM
The SAE J1850 VPW
The ISO 14230-4
The ISO 9141-2
The ISO 15765-4
Please feel free to contact us ,If you have any question:
Attention: PLZ leave your telephone number and address in detail when you take order in our website, it is very important to ship your order. (Customers from Brazil PLZ leave your Cutsom ID also, thanks!)