adBlueOBD2 is a Plug&Drive Ready device to mulate working adBlue systems and NOx sensors on trucks, which equipped with EURO 4/5 catalytic converter systems,even with damaged adBlue SCR system.
Launch X431 PAD VII/PAD V not only does gasoline cars but also diesel heavy-duty trucks. Heavy duty license need to be purchased separately. The package includes full set of truck adapters.
Used with X300 DP, X300 DP Plus and X300 Pro4.Supports TOYOTA 8A non-smart key all keys lost programming This adapter need to work with OBDSTAR Key SIM 5 in 1 (for Toyota).Supports Ford all keys lost programming.
P004 adapter is designed for ECU programming, reading or writing data in bench mode.
OBDSTAR P002 Adapter is designed for 8A non-smart key all keys lost programming, FORD all keys lost programming
LAUNCH X431 CAN FD Connector Features: 1. Work for Can FD Compatibel Vehicles 2. Compatible with: X431 Throttle, Pad II AE, Torque, Turbo, X431 V+, Pro3, Pad 3, Pad V
For BOSCH ECU data reading, CS, Pincode reading etc., including Audi, Citroen, DS, Mahindra, Peugeot, Skoda, SEAT, Volkswagen etc. More models are in development...
CAN Filter is designed to support old mileage data blocking on Mercedes-Benz vehicles. It is designed to prevent regeneration of the old mileage state in vehicle dashboard (odometer). CAN filter doesn’t interrupt any vehicle electronic system.
KYDZ MLB-Tool can be used to caculate data and generate dealer key.
Launch X431 PAD VII/PAD V not only supports gasoline cars but also diesel heavy-duty trucks. Heavy duty license needs to be purchased separately. Buy License Get Free Adapter Set.
MOTO IMMO kits can work with our company's IMMO tablets series products such as X300 DP Plus, X300 DP, X300 Pro4. With it, motorcycle and car IMMO can be completed in one device. It's friendly, economical, convenient to the locksmiths.
It is a replacement for broken or lost DBSCAR bluetooth connector of original X431 Devices.
Isuzu Tech2 can diagnose all Isuzu car model like UC, N, TF, F, C series. The adapter should be used with Tech2 Interface
With these cables you can do some old trucks. Full 8 Truck Cables Set is to connect truck,one side connects truck, one side connects device.
14 pin diagnostic testing cable has stable performance and high reliability.
It works on MB SD Connect C4 Multiplexer, not for MB STAR C3 or C3 Pro.
This diagnostic cable for mb star c4 diagnostic tool . You can use this one to replace your old cable;
High Quality MB STAR C3 OBD2 OBDII 38PIN Cable for Compact 3 Star Diagnosis 38 Pin Testing Cable
16Pin Cable Replacement for MBSTAR Compact3 MB Star C3 Multiplexer Test Cable
1pc x RS232 to RS485 Cable for MB STAR C3
For programming with MOST port (Connect to MOST in vehicle / to ICOM-A with USB system. This is BMW ICOM Most module sale alone.
Portable and durable, easy to carry, lightweight Car Cables for Multi-Cardiag/ DS150/ AUTOCOM M8 CDP Plus 3 in 1
OBD2 Cable for Main Testing Cable for Vocom Work with VOCOM 88890300 VOCOMII 88894000
VOCOM 88890305 USB cable for VOCOM 88890300 and VOCOMII 88894000
High quality SD Connect Compact4 OBD2 16PIN Cable for MB Star SD C4 OBD II 16 pin main testing Cable
OEM Volvo EMS2.2-2.3-2.4 connecting cable is used for Volvo ECU model ( EMS2.2+2.3+2.4) before 2021.It can be used to connect KT200, FOXFLASH and other ecu programming tools. Read and write TRW EMS2. x ECUs on bench. Used to connect to ECU module without the risk of bending pins, and also saves a lot of time.
6Pin cable for Penta 8Pin male & female cable for Penta
Designed for drilling access to the FBS4 7G-Tronic VGS4-0-NAG2 Transmission Control Module (TCM), OBDSTAR C4-07 (MB-VGS4-0-NAG2) adapter kit supports solder-free virginizing of used TCM via JTAG mode.
RH850/V850 Adapter and Other OBDSTAR Accessories be used with MP001 programmer for OBDSTAR G3/DC706
Tornado 90000 serves as a smart battery charger for all types of 12V/24V lead-acid batteries, including Wet, Gel, MF, Cal, EFB, and AGM from 20Ah to 2800Ah(150 CCA and Up). It can not only start ordinary cars and SUVs, but also large vehicles that require high starting current, such as trucks, tractors, construction machinery, and even diesel vehicles and ships.
Supported Tools: Use with OBDSTAR G3, DC706, etc.
Collecting ELV/TCM authentication data through the dashboard connector. Collect ELV authentication data and calculate immo data.
Transmission dedicated connectors collection, used for transmission ECU cloning, read/write MAP, diagnosis, mileage calibration and other functions, support Volkswagen, Mercedes-Benz, BMW, Porsche and many other brands, can be directly operated by OBD or by BENCH, no jumper connection required, convenient and fast.
Transmission dedicated connectors collection, used for transmission ECU cloning, read/write MAP, diagnosis, mileage calibration and other functions
Support VW IMMO IV NEC24C64 and NEC24C32 All Keys Lost Without Removing IC, soldering PCB and making server data Read immo data on bench
OBDSTAR P005 adapter kit includes P005 custom board and W012 connecting main cable. It is used for IMMO function of BMW BDC02.
OBDSTAR ECM-001 is an addtional adapter for the X300 Classic G3 and DC706 to read immo data for following ECUs: DCM6.2V MED17.5.25 MED17.5.21 ME17.5.22 EDC17C64
OBDSTAR RH850/V850 adapter kit is for airbag reset, immo data/pincode read (Dashboard, BCM, ELV, etc.).And all data read is unencrypted, can be used on third party devices!
TOPDON Tornado120000 is a professional smart programming power supply designed to provide efficient charging and voltage stabilization for vehicles equipped with 12V batteries. It features intelligent current (5-120A) and voltage (11-16.8V) output adjustment and boasts a maximum power of 1700W to confidently handle every battery.
MSOBD2KIT is compatible with all MaxiSys tablets, Elite, Elite II, MS908P, MS906 series, MSUltra, MS919, and MS909, and its OE-compliant adapters are specially designed for vehicles produced between 1996 and 2002 which do NOT have the standard OBD2 pin co
