VCDS HEX-V2 V22.3.0 VAG COM 22.3.0 VCDS HEX V2 Intelligent Dual-K & CAN USB Interface
VCDS HEX-V2 Cable support to work with Multi-language VCDS crack software in official website. HEX-V2 Dual-K+CAN USB Interface Compatible with all diagnostic-capable VW/Audi passenger cars from 1996 to currnet, Windows-based diagnostic software for VW/Audi/Skoda/Seat etc.
VCDS HEX-V2 Cable Overview:
Support Language: English, French, German, Chinese, Russian, Italian, Czech, Hungary, Spain, Portugal, Sweden, Netherlands, Russia (Need to use loader to run other languages except English)
Vehicle List: For Audi/VW/Skoda/Seat etc
: Windows 7 or newer
VCDS VAG COM HEX-V2 Cable Software Multi-language As Following:
Notice: if you would like to the newest software version V2023.03, please download from official website.
Notice : firmware upgrade has two parts
Do not interrupt the startup of the device during the upgrade and wait until the device is upgraded successfully
The loader does not need to activate.
How to use the Loader for multi-language? See picture below
WITH VCDS YOU CAN:
1.Gain factory level access to all systems in cars from 1990 through the current model year
2.Scan for and clear DTCs with 19,000+ fault codes decoded into plain text
3.Alter settings through module coding accessible only by factory level tools
4.Perform various country-specific modifications to your car (remove seat belt chime, enable gauge test/needle sweep, enable lap timer, operate windows and sunroof with remote, and much more)View and log live data
5.Reset service reminder
6.Perform built in tests and calibrations normally reserved for factory level tools
7.Diagnose real failures instead of swapping parts!
V-CDS Hex-V2 Features:
1. Fully licensed for VCDS software, acts as the key to unlock the software, no additional software purchase required.
2. USB connection, compatible with all modern laptops.
3. Compatible with all diagnostic-capable VW/Audi passenger cars from 1996 to current; K, K+L, dual-K, or CAN.
4. Detachable USB cable.
The supplied cable has a proprietary screw locking mechanism, but it can be replaced temporarily with a standard USB-A to USB-B ("printer") cable when it become damaged.
5. Modern 32-bit micro-controller and fully updatable firmware.
6. Tri-Color (red/green) status/activity LEDs with greatly improved visibility from almost any angle.
7. Includes an embedded license for VCDS and thus acts as a "dongle" for the software, allowing the software to be used and installed on any compatible PC.
We recommend at least a 1 GHz dual-core processor with 1 GB of RAM and Windows 7 or newer(Windows 7 through 10, but not RT) with an available USB 2.0 (or higher) port.
Slower computers or Windows 2000, XP, and Vista may work but are not officially supported.
Windows 8. 8.1 or 10 on a machine robust enough to support the respective operating system are also fine.
Windows running inside a Virtual Machine (for example on a Mac) is not supported.
Extending this Interface:
The cable supplied with this interface is about 6 feet long -- just right for most laptops.
The USB standards do not allow for passive extension cords!
We have tested many Active USB extensions and have found one that works. You can order the 16-ft Active USB Extension from our Store. We do not sell or support any other brands or models of USB extensions, if you have problems when using one, the first thing we're going to tell you is to eliminate the extension. We sell also a 3-ft OBD extension in our web store that lets you keep your diagnostic tool connected and away from the driver's feet and legs.
Original Plan VCDS HEX-V2 VAG COM Interface Display:
VCDS HEX-V2 Cable with 1:1 Original Plan PCB Board Display:
1pc x VCDS HEX V2 Intelligent Dual-K & CAN USB Interface
Is it possible to pay by, for example, Dotpay or some other payment method?
I don't have PayPal. Does hex v2 original also work with version 22.10.0 is also in Polish or only 22.10.0
Answer:We also accept payment via Bank Transfer and Western Union except Paypal. And the Hex-v2 in our website support update online, it works with 22.10.0 well. Just if you need to use multi-language software, you will need to use the loader to run it.
Did you really test this Hex V2 with official 22.10.0 VCDS ? Lot of people reported locked hardware asking for Firmware update ?
How to update Firmware ?
Answer: Hello friend, thanks for your question, our VCDS Hex-v2 can use with the 22.10.0 version in official website without problem. For other people said locked hardware, i am not sure if they use the same one with ours.
For firmware update, we have a loader to help with it. Usually the loader is for multi-language use, it also supports update firmware. Just use the latest version of loader.
Can I use it for 2012 VW CC 2.0 TSI?
Answer: Thanks for your question. Normally the VCDS Hex-V2 can support the Vehicle you need to work. Just Hex-V2 is better to cars since 2017 till latest. For cars in 2012, it's better to have VCDS (DF473) in our website.
CaIs the Software Version update able ?
Answer: Hello friend, the VCDS Hex-V2 support update online and official website software. Thanks.
Is this UNLIMITED cars and VIN numbers? or does it only support one car?
Answer: Hello friend, for the VCDS Hex-V2 cable, it's not for only one car. Our factory made it without limited vin, we still haven't received bad feedback that it cannot support any car model yet. Hope this helps!
Product Key is inlcude the Kabel?
Answer: Hi friend, what kind of key you mean? The VCDS Hex-V2 no need to activate software via keygen, can use directly with official software and update online
Does it support UDS protocol?
Answer: Yes friend, it supports UDS protocol.