WOYO CTB007 TRUCK 24V to 24V/12V-14.5V Adjustable OBD Voltage Converter Protect Diagnostic Tools
WOYO CTB007 TRUCK Professional OBD2 Tester 24V to 24V/12V-14.5V Regulated Output Voltage Converter.It exposes all OBD-II pins, monitors live voltage (True RMS), and enables a safe, fast connection with other diagnostic/programming devices.
WOYO CTB007 Features:
1. Expensive Diagnostic Tool Protection:
Compatible with diagnostic protocols; 12V-compatible tools are safeguarded.
2. Step-Down Regulated Conversion:
Delivers 4A 50W power, adjusting output voltage to 12V–14.5V for diagnostic equipment protection.
3. Accurate Current Display:
Precisely shows load-side supply current.
4. HD LCD Screen:
Simultaneously displays multi-channel RMS voltage values, allowing real-time pin status checks and easy fault troubleshooting during diagnosis.
5. Dual Operation Modes:
Press the Up and Down buttons simultaneously to activate direct voltage mode (Input = Output); press any button to revert to regulated mode.
WOYO CTB007 Operation Instructions:
1. Precise Regulated Voltage Control: Short press to adjust output voltage precisely (12V–14.5V).
2. Direct Mode Activation:Press & hold both buttons simultaneously for ≥2s to enable "Input Voltage = Output Voltage" direct mode.
3. Regulated Mode Resume: After releasing, press either button randomly to restore regulated output mode.
4. Real-time OBD-II Pin Voltage Monitor (VRMS / true RMS):
Power/ground integrity: e.g., pin 16 (+B) and pins 4/5 (grounds).
Bus activity on CAN / K-Line: checks whether static/dynamic levels look reasonable; a green background indicates dynamic values.
Pin assignment sanity-check: quickly validates expected wiring on retrofits or suspect harnesses—replacing basic VPP voltage checks.
5. Signal Status:
Pin background flashing green = dynamic signal.
6. PIN 16 High/Low Voltage Audible Alarms:
Low-voltage (slow beep):
24 V systems: < 23.6 V
High-voltage (fast beep):
24 V systems: > 31 V
7. Ground Status Indication:
Pins 4 or 5 show OPEN when no ground is detected,
and GND when a valid ground is present.
8. External power input:
24-31V DC, barrel 5.5 × 2.1 mm.
WOYO CTB007 Version Comparison:
WOYO CTB007 Package List:
1 x Main Device
Please feel free to contact us ,If you have any question:
Email: Sales@obd2.ltd
Whatspp: +8613632856735
Shipping Terms:
a) Items will be sent to all the countries over the world. This package will be sent by DHL, Fedex, EMS, UPS, USPS, Singapore Post or E-Packet .
b) Items will be checked carefully before sent out.
c) We will use air bubbles to wrap the items carefully.
Shipping Time:
a) Ships within 48 hours on working days after received the payment.
b) The shipping time is about 5-7 days via DHL, UPS, 5-10 days Via Fedex, 7-10 days via EMS, 7-30 days via USPS, Singapore Post or E-Packet to Worldwide
Note: We hope it arrive on time but since this is an international delivery,
shipping time will be highly depended on the courier company and local customs/duties. Thank you for your understanding.
Return Policies:
Returns will be allowed only with prior authorization, and must be made within 30 days after package delivery.
Item conditions that allow returns Brand new Item, returns must include all accessories, Items must include original packaging
Other cases are as follows:
(1) When the item is defective, the item was sent in error, damaged in transit, or otherwise defective,It can not work once you receive it. In this case we allow returns. We bear the shipping cost.
(2) When you buy the wrong item, the item doesn't fit, or you don't want the item, the item you return need to be brand new. you need bear shipping costs.
Contact Us:
Our Email sales@obd2.ltd 24 hours 7 days
And if nobody answer you online in time sometimes,do not worry.leave us a message or write down your desires,we will contact you as soon as possible.
Attention: PLZ leave your telephone number and address in detail when you take order in our website, it is very important to ship your order. (Customers from Brazil PLZ leave your Cutsom ID also, thanks!)
|